HPA Regulator and Line for HPA Systems
Use this HPA regulator and line to connect your HPA system to a compatible gas cylinder and adjust the output pressure as needed.
Installation and Adjustment Instructions
-
Connect the regulator to your HPA device using the included hose and quick-disconnect fitting.
-
Before connecting the gas cylinder, make sure the cylinder valve output pressure, which is the regulator input pressure, is below 1,000 PSI.
-
Before connecting the gas cylinder, use an Allen wrench to loosen the pressure adjustment screw by turning it counterclockwise.
If the regulator has no pressure or needs to be readjusted, always loosen the pressure adjustment screw before reconnecting the gas cylinder. This helps prevent damage to the pressure gauge and quick-disconnect fitting.
-
Attach the regulator to the gas cylinder. The initial output pressure is approximately 40 PSI.
-
Slowly turn the pressure adjustment screw clockwise to increase the output pressure to the desired level. The maximum adjustable output pressure is approximately 160 PSI.
Important Safety Information
Always loosen the pressure adjustment screw before connecting a gas cylinder if the regulator has no pressure or requires readjustment.
Do not exceed the specified pressure limits. Check all connections before use and ensure that the regulator, hose, fittings, and gas cylinder are compatible with your HPA system.